Solar panels are necessary, especially if we want to contribute to the environment. Moreover, there are several benefits of installing solar panels at your home.
Not only do they minimize your energy expenditures but they also add to the value of your home.
However, most people are often confused about whether to DIY solar system installation or to hire a contractor.
Each has its perks but if you think you are comfortable DIYing the installation, then take a look at the following tips that can help you with it:
The first thing to do is to set up the conduit and the platform that you want to install the solar panels on.
Make sure to choose the position of your roof that has the maximum exposure. This will allow the panels to get maximum light for energy production.
Choosing a high quality conduit will help secure the connection from the solar platform to your house. Most conduits are short since the platform is your roof.
Another element to focus on is mounting the solar panels. You need to make sure to drill them competently so that they don't move from their place.
You can also use pre-fastened brackets that provide an effective grip. In case the brackets are unavailable, then do buy one or contact your dealer to provide you with the brackets.
In addition, make sure that the brackets are squared and centered before you install them. This would give effective positioning and stance for the solar panels.
If you are looking for solar system installation company in Colorado, check out solar system installer Denver CO.
When you’re DIYing, you have the freedom to choose the best position for the panels. But in doing so, ensure that you’ve got all the meteorological data regarding Sun’s position.
Once the most optimal position is determined, ensure that the rear legs are tilted slighting upwards.
This is to give maximum exposure for the panel. When this is done you can pre-fasten the panels.
Ensure that you understand the wiring array first since this will help the system work without any failure.
The solar breaker is connected to a circuit breaker disconnect.
The modules of the panels should be stripped for pair wiring into the fuse box. The platform must be connected with underground conduit output cables.
Overall, the wiring process has a lot of processes. If you aren't familiar with electrical wiring, it is highly recommended to hire a pro for it.
In addition, you should first understand how the wiring works and then opt to DIY the entire project
